案列背景(共27页精讲):
手把手教您在CFG中配置一个接收TX的(Multiplexed-I-PDU)多路复用Frame。并附上配置后的测试CAN log。
在“【ARXML专题】_3_在CANFD或CAN2.0的系统描述ARXML文件中创建Multiplexed多路复用信号https://blog.csdn.net/qfmzhu/article/details/111999715”中,我们已经掌握了使用AUTOSAR System Description Network Explorer工具在ARXML文件中实现Multiplexor多路复用Frame。下面创建一个如下的多路复用Frame :Test_ID_212:
- 信号Static_Part_Signal_1, Static_Part_Signal_2不随多路复用信号(Multiplexor Signal,简称: Multiplexor)Pack_Number变化;
- 多路复用信号Pack_Number =0时,发送信号Cell_1_Voltage, Cell_2_Voltage, Cell_3_Voltage;
- 多路复用信号Pack_Number =1时,发送信号Cell_4_Voltage, Cell_5_Voltage, Cell_6_Voltage;
- 多路复用信号Pack_Number =2时,发送信号Cell_7_Voltage, Cell_8_Voltage, Cell_9_Voltage;
目录