继电器控制实验

继电器控制实验

#include "relay.h"

void Relay_Init(void)
{
    EALLOW;
    SysCtrlRegs.PCLKCR3.bit.GPIOINENCLK = 1;// 开启GPIO时钟

    //继电器端口配置
    GpioCtrlRegs.GPAMUX1.bit.GPIO15=0;
    GpioCtrlRegs.GPADIR.bit.GPIO15=1;
    GpioCtrlRegs.GPAPUD.bit.GPIO15=0;

    EDIS;

    GpioDataRegs.GPACLEAR.bit.GPIO15=1;
}

#ifndef RELAY_H_
#define RELAY_H_

#include "DSP2833x_Device.h"
#include "DSP2833x_Examples.h"

#define RELAY_ON            (GpioDataRegs.GPASET.bit.GPIO15=1)
#define RELAY_OFF           (GpioDataRegs.GPACLEAR.bit.GPIO15=1)


void Relay_Init(void);



#endif /* APP_RELAY_RELAY_H_ */

#include "DSP2833x_Device.h"
#include "DSP2833x_Examples.h"
#include "leds.h"
#include "beep.h"
#include "relay.h"



void main()
{
    int i = 0;

    InitSysCtrl();//系统时钟初始化，默认已开启F28335所有外设时钟

    LED_Init();
    BEEP_Init();
    Relay_Init();

    RELAY_ON;

    while(1)
    {
        i++;
        if(i%200)
        {
            LED1_TOGGLE;
        }
        DELAY_US(1000);//系统的延迟函数单位是us 此处为延迟100us
    }
}