[详细教程]ubuntu16.04安装ORB-SLAM与ORB-SLAM2

最新推荐文章于 2024-08-07 11:23:33 发布

HeyMountain

最新推荐文章于 2024-08-07 11:23:33 发布

阅读量2.5k

点赞数 1

分类专栏：安装软件

本文链接：https://blog.csdn.net/weixin_45617478/article/details/110122851

版权

安装软件专栏收录该内容

51 篇文章 4 订阅

订阅专栏

一、ORB-SLAM介绍

ORB-SLAM是一种多功能且精确的单目SLAM解决方案，能够实时计算摄像机轨迹，并在各种环境下稀疏地重建场景，从小型手持序列到在几个城市街区行驶的汽车。它能够关闭大的循环，并从宽基线实时执行全局重新定位。
项目主页：链接

二、准备

1.boost库开始多线程

sudo apt-get install libboost-all-dev

2.安装ROS
参考链接：1.博客 2.官方文档
3.安装opencv
4.g2o (included in Thirdparty)
源码链接：链接
这个源码里就有，不用额外下载，不过为了顺利安装成功，需要提前运行如下程序

sudo apt-get install libeigen3-dev//版本最低3.1.0

5. DBoW2 (included in Thirdparty)
源码链接：链接，同样不需要额外下载，看一下就好。

三、安装

1.确认已经安装好所有的依赖：ROS，boost, eigen3, opencv, blas, lapack
2.克隆ORB-SLAM源码

git clone https://github.com/raulmur/ORB_SLAM.git ORB_SLAM

3.将当前ORB-SLAM的路径添加到bashrc中.获取ORB-SLAM文件夹的路径
在这里插入图片描述

sudo gedit ~/.bashrc //打开bashrc文件
export ROS_PACKAGE_PATH=${ROS_PACKAGE_PATH}:/home/ning/1.software/ORB_SLAM   //加入ORB-SLAM文件夹的路径，注：这里应替换成自己电脑上的ORB-SLAM文件夹的路径
source ~/.bashrc

4.Build g2o。cd Thirdparty/g2o/

		mkdir build
		cd build
		cmake .. -DCMAKE_BUILD_TYPE=Release
		make

5.Build DBoW2. Go into Thirdparty/DBoW2/ and execute:

		mkdir build
		cd build
		cmake .. -DCMAKE_BUILD_TYPE=Release
		make

6.Build ORB_SLAM. In the ORB_SLAM root execute:

		mkdir build
		cd build
		cmake .. -DROS_BUILD_TYPE=Release
		make

编译报错1：

ning@ning:~/1.software/ORB_SLAM/build$ cmake .. -DCMAKE_BUILD_TYPE=Release
[rosbuild] Building package ORB_SLAM
Failed to invoke /opt/ros/kinetic/bin/rospack deps-manifests ORB_SLAM
[rospack] Error: package 'ORB_SLAM' depends on non-existent package 'opencv2' and rosdep claims that it is not a system dependency. Check the ROS_PACKAGE_PATH or try calling 'rosdep update'


CMake Error at /opt/ros/kinetic/share/ros/core/rosbuild/public.cmake:129 (message):
  

  Failed to invoke rospack to get compile flags for package 'ORB_SLAM'.  Look
  above for errors from rospack itself.  Aborting.  Please fix the broken
  dependency!

Call Stack (most recent call first):
  /opt/ros/kinetic/share/ros/core/rosbuild/public.cmake:207 (rosbuild_invoke_rospack)
  CMakeLists.txt:4 (rosbuild_init)


-- Configuring incomplete, errors occurred!
See also "/home/ning/1.software/ORB_SLAM/build/CMakeFiles/CMakeOutput.log".

解决办法1：

打开/ORB-SLAM/manifest.xml文件，注释掉<depend package="opencv2"/>，最终的manifest.xml文件如下：

<package>
  <description brief="ORB_SLAM">

     ORB_SLAM

  </description>
  <author>Raul Mur-Artal</author>
  <license>GPLv3</license>
  <depend package="roscpp"/>
  <depend package="tf"/>
  <depend package="sensor_msgs"/>
  <!--<depend package="opencv2"/>-->
  <depend package="image_transport"/>
  <depend package="cv_bridge"/>


</package>

编译报错2：

/home/ning/1.software/ORB_SLAM/src/ORBextractor.cc: In member function ‘void ORB_SLAM::ORBextractor::ComputeKeyPoints(std::vector<std::vector<cv::KeyPoint> >&)’:
/home/ning/1.software/ORB_SLAM/src/ORBextractor.cc:607:63: error: ‘FAST’ was not declared in this scope
                 FAST(cellImage,cellKeyPoints[i][j],fastTh,true);
                                                               ^
/home/ning/1.software/ORB_SLAM/src/ORBextractor.cc:616:34: error: ‘ORB’ has not been declared
                 if( scoreType == ORB::HARRIS_SCORE )
                                  ^
/home/ning/1.software/ORB_SLAM/src/ORBextractor.cc:683:17: error: ‘KeyPointsFilter’ has not been declared
                 KeyPointsFilter::retainBest(keysCell,nToRetain[i][j]);
                 ^
/home/ning/1.software/ORB_SLAM/src/ORBextractor.cc:699:13: error: ‘KeyPointsFilter’ has not been declared
             KeyPointsFilter::retainBest(keypoints,nDesiredFeatures);
             ^
/home/ning/1.software/ORB_SLAM/src/ORBextractor.cc: In member function ‘void ORB_SLAM::ORBextractor::operator()(cv::InputArray, cv::InputArray, std::vector<cv::KeyPoint>&, cv::OutputArray)’:
/home/ning/1.software/ORB_SLAM/src/ORBextractor.cc:760:82: error: ‘GaussianBlur’ was not declared in this scope
         GaussianBlur(workingMat, workingMat, Size(7, 7), 2, 2, BORDER_REFLECT_101);
                                                                                  ^
/home/ning/1.software/ORB_SLAM/src/ORBextractor.cc: In member function ‘void ORB_SLAM::ORBextractor::ComputePyramid(cv::Mat, cv::Mat)’:
/home/ning/1.software/ORB_SLAM/src/ORBextractor.cc:800:78: error: ‘INTER_LINEAR’ was not declared in this scope
             resize(mvImagePyramid[level-1], mvImagePyramid[level], sz, 0, 0, INTER_LINEAR);
                                                                              ^
/home/ning/1.software/ORB_SLAM/src/ORBextractor.cc:800:90: error: ‘resize’ was not declared in this scope
             resize(mvImagePyramid[level-1], mvImagePyramid[level], sz, 0, 0, INTER_LINEAR);
                                                                                          ^
/home/ning/1.software/ORB_SLAM/src/ORBextractor.cc:803:80: error: ‘INTER_NEAREST’ was not declared in this scope
                 resize(mvMaskPyramid[level-1], mvMaskPyramid[level], sz, 0, 0, INTER_NEAREST);
                                                                                ^
CMakeFiles/ORB_SLAM.dir/build.make:443: recipe for target 'CMakeFiles/ORB_SLAM.dir/src/ORBextractor.cc.o' failed
make[2]: *** [CMakeFiles/ORB_SLAM.dir/src/ORBextractor.cc.o] Error 1
make[2]: *** Waiting for unfinished jobs....
CMakeFiles/Makefile2:227: recipe for target 'CMakeFiles/ORB_SLAM.dir/all' failed
make[1]: *** [CMakeFiles/ORB_SLAM.dir/all] Error 2
Makefile:127: recipe for target 'all' failed
make: *** [all] Error 2

解决办法2：

打开/ORB_SLAM/include/ORBextractor.h文件，添加以下两个头文件

#include <opencv2/imgproc.hpp>
#include <opencv2/features2d/features2d.hpp>

编译报错3：

/usr/local/include/eigen3/Eigen/src/Core/util/StaticAssert.h:125:9: error: ‘YOU_MIXED_DIFFERENT_NUMERIC_TYPES__YOU_NEED_TO_USE_THE_CAST_METHOD_OF_MATRIXBASE_TO_CAST_NUMERIC_TYPES_EXPLICITLY’ is not a member of ‘Eigen::internal::static_assertion<false>’
         if (Eigen::internal::static_assertion<static_cast<bool>(CONDITION)>::MSG) {}

解决办法3：

是eigen库版本的问题，更换eigen版本之前需要先清理一下电脑上原本的eigen3库（查看eigen版本：打开/usr/include/eigen3/Eigen/src/Core/util/Macros.h 文件即可看到定义）

sudo mv /usr/include/eigen3 /temp/usr_include/eigen3
sudo mv /usr/local/include/eigen3 /temp/usr_local_include/eigen3//后面的路径可以自己随便定义

访问网站，
在这里插入图片描述
下载libeigen3-dev_3.2.0-8_all.deb文件，执行

sudo dpkg -i libeigen3-dev_3.2.0-8_all.deb

编译报错4：

/usr/bin/ld: CMakeFiles/ORB_SLAM.dir/src/main.cc.o: undefined reference to symbol '_ZN5boost6system15system_categoryEv'
/usr/lib/x86_64-linux-gnu/libboost_system.so: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
CMakeFiles/ORB_SLAM.dir/build.make:1609: recipe for target '../bin/ORB_SLAM' failed
make[2]: *** [../bin/ORB_SLAM] Error 1
CMakeFiles/Makefile2:324: recipe for target 'CMakeFiles/ORB_SLAM.dir/all' failed
make[1]: *** [CMakeFiles/ORB_SLAM.dir/all] Error 2
Makefile:116: recipe for target 'all' failed
make: *** [all] Error 2

解决办法4：

是因为程序在编译时没找到boost依赖的库，打开终端定位boost_filesystem与boost_system两个库的位置

ning@ning:~/1.software/ORB_SLAM/build$ locate boost_filesystem
/usr/lib/x86_64-linux-gnu/libboost_filesystem.so.1.58.0
ning@ning:~/1.software/ORB_SLAM/build$ locate  boost_system
/usr/lib/x86_64-linux-gnu/libboost_system.so.1.58.0

打开/ORB_SLAM/CMakeList.txt文件，在最底部target_link_libraries中加入上面两个库的路径，变成

target_link_libraries(${PROJECT_NAME}
${OpenCV_LIBS}
${EIGEN3_LIBS}
${PROJECT_SOURCE_DIR}/Thirdparty/DBoW2/lib/libDBoW2.so
${PROJECT_SOURCE_DIR}/Thirdparty/g2o/lib/libg2o.so
/usr/lib/x86_64-linux-gnu/libboost_system.so.1.58.0
/usr/lib/x86_64-linux-gnu/libboost_filesystem.so.1.58.0
)

重新编译，成功！
在这里插入图片描述

四、测试

1.解压ORBvoc.txt文件

cd /ORB_SLAM
tar -xzvf ORBvoc.txt.tar.gz //解压

在这里插入图片描述
…
参考链接进行测试

二、ubuntu16安装ORB-SLAM2

HeyMountain

关注

1
点赞
踩
23

收藏

觉得还不错? 一键收藏
0
评论
复制链接

分享到 QQ

分享到新浪微博

扫一扫

专栏目录