声明：一些图片是不该有水印的，CSDN把图片链接的格式改了，暂时还不知道怎么去掉，请见谅！！！
目录
写在前面：其实联合标定用的 kalibr 可以直接完成相机标定、IMU标定、相机+IMU联合标定整个流程。这里只写了联合标定，另外两种之前不是用kalibr 做的，所以没有kalibr 的部分，感兴趣的同学可以去官网自己研究
1、 IMU的标定
1.1 IMU数据读取
首先要读取IMU数据，之前写过一篇，如果你的IMU也和我的一样没有官方ros历程的话，可以参考
1.2 IMU数据滤波
关于IMU滤波，不同IMU应该不一样，流程可以参考博客
1.3 录制rosbag包
将滤波后的imu信息录制为rosbag
先查看 topic 列表
rostopic list
命令行查看 topic内容：
rostopic echo /topic
静置IMU，录制imu话题 (一般为两个小时左右)
rosbag record /imu/data -o imu.bag
1.4 kalibr_allan 标定
这部分和博客1.2部分完全一致，注意修改topic话题名称为 “/imu/data” 即可。
亦可以使用上面博客的1.1部分的imu_utils，不过好像kalibr_allan 精度更高些。
2、相机的标定
之前写过两个：
MatLab的双目相机标定和orbslam双目参数匹配
ROS+Opencv的双目相机标定和orbslam双目参数匹配
也可以按照 kalibr 的来：
1、先下载kalibr提供的网格
2、相机发布频率改为4
rosrun topic_tools throttle messages /camera/left/image_raw 4.0 /stereo/left/image_raw
rosrun topic_tools throttle messages /camera/right/image_raw 4.0 /stereo/right/image_raw
3、录制ROS bag 包
rosbag record /stereo/left/image_raw /stereo/right/image_raw -O zed_images.bag
4、kalibr 标定:
kalibr_calibrate_cameras --target april_6x6_24x24mm.yaml --bag images.bag --bag-from-to 5 30 --models pinhole-radtan pinhole-equi --topics /stereo/left/image_raw /stereo/right/image_raw
kalibr支持多种相机模型
好像还可以用 ROS camera_calibration 包，记录一下，没有用过。
图像标定后的去畸变代码示例（来自github）：
bool DuoCalibParam::initUndistortMap(const cv::Size &new_img_size) {
// compute the boundary of images in uv coordinate
/// 1、计算图像边界
this->Camera.lurd_lr.resize(2);
for (int lr = 0; lr < 2; ++lr) {
std::vector<cv::Point2f> lurd(4);
lurd[0].x = 0;
lurd[0].y = this->Camera.img_size.height / 2;
lurd[1].x = this->Camera.img_size.width / 2;
lurd[1].y = 0;
lurd[2].x = this->Camera.img_size.width;
lurd[2].y = this->Camera.img_size.height / 2;
lurd[3].x = this->Camera.img_size.width / 2;
lurd[3].y = this->Camera.img_size.height;
std::vector<cv::Point2f> lurd_undistort(4);
cv::undistortPoints(lurd, lurd_undistort,
this->Camera.cv_camK_lr[lr],
this->Camera.cv_dist_coeff_lr[lr]);
this->Camera.lurd_lr[lr][0] = lurd_undistort[0].x;
this->Camera.lurd_lr[lr][1] = lurd_undistort[1].y;
this->Camera.lurd_lr[lr][2] = lurd_undistort[2].x;
this->Camera.lurd_lr[lr][3] = lurd_undistort[3].y;
}
/// 2、计算双目校正参数
this->Camera.undistort_map_op1_lr.resize(2);
this->Camera.undistort_map_op2_lr.resize(2);
vector<cv::Mat> R(2);
vector<cv::Mat> P(2);
//转换Eigen::Matrix 为 cv:Mat类型
Matrix4f C0_T_C1 = this->Camera.D_T_C_lr[0].inverse() * this->Camera.D_T_C_lr[1];
Matrix4f C1_T_C0 = C0_T_C1.inverse();
cv::Mat C0_R_C1(3, 3, CV_64F);
cv::Mat C1_R_C0(3, 3, CV_64F);
cv::Mat C1_t_C0(3, 1, CV_64F);
cv::Mat C0_t_C1(3, 1, CV_64F);
for (int i = 0; i < 3; ++i) {
for (int j = 0; j < 3; ++j) {
C0_R_C1.at<double>(i, j) = C0_T_C1(i, j);
C1_R_C0.at<double>(i, j) = C1_T_C0(i, j);
}
C0_t_C1.at<double>(i, 0) = C0_T_C1(i, 3);
C1_t_C0.at<double>(i, 0) = C1_T_C0(i, 3);
}
cv::Matx44d Q;
cv::stereoRectify(this->Camera.cv_camK_lr[0],
this->Camera.cv_dist_coeff_lr[0],
this->Camera.cv_camK_lr[1],
this->Camera.cv_dist_coeff_lr[1],
this->Camera.img_size,
C1_R_C0, C1_t_C0,
R[0], R[1],
P[0], P[1],
Q, cv::CALIB_ZERO_DISPARITY, 0, new_img_size);
this->Camera.Q = cv::Matx44f(Q); // opencv好像对浮点类型也卡的比较死，没有自动类型转换
/// 3、计算双目去畸变map（映射）
this->Camera.cv_undist_K_lr.resize(2);
this->Camera.undist_D_T_C_lr.resize(2);
// 分别计算左右目图像的去畸变map
for (int lr = 0; lr < 2; lr++) {
cv::Mat newK(3, 3, CV_32F);
for (int i = 0; i < 3; ++i) {
for (int j = 0; j < 3; ++j) {
// note P[lr] doesn't work
newK.at<float>(i, j) = P[lr].at<double>(i, j);
}
}
cv::initUndistortRectifyMap(this->Camera.cv_camK_lr[lr],
this->Camera.cv_dist_coeff_lr[lr],
R[lr],
newK, // this->Camera.cv_camK_lr[lr], // newK
new_img_size,
CV_32FC1,
this->Camera.undistort_map_op1_lr[lr],
this->Camera.undistort_map_op2_lr[lr]);
this->Camera.cv_undist_K_lr[lr] = cv::Matx33f(newK);
this->Camera.undist_D_T_C_lr[lr].setIdentity();
}
// Compute the new *rectified* extrinsics
// In undist_D_T_C_lr, we assume D_T_C_l is identity, which means,
// the device {D} is *moved* to the new C_l (R[0] is actually Cl_new_R_Cl)
// Therefore, D_T_I needs to be adjusted as well to undist_D_T_I.
/// 4、计算去畸变后的cam0_to_cam1和 cam0_to_imu
cv::Mat new_C0_t_C1 = R[0] * C0_t_C1;
this->Camera.undist_D_T_C_lr[1](0, 3) = new_C0_t_C1.at<double>(0);
this->Camera.undist_D_T_C_lr[1](1, 3) = new_C0_t_C1.at<double>(1);
this->Camera.undist_D_T_C_lr[1](2, 3) = new_C0_t_C1.at<double>(2);
Eigen::Matrix4f new_D_T_D = Eigen::Matrix4f::Identity();
for (int i = 0; i < 3; ++i) {
for (int j = 0; j < 3; ++j) {
new_D_T_D(i, j) = static_cast<float>(R[0].at<double>(i, j));
}
}
this->Imu.undist_D_T_I = new_D_T_D * this->Imu.D_T_I;
return true;
}
3、相机 - IMU联合标定
3.1 库安装
安装依赖
sudo apt-get install python-setuptools python-rosinstall ipython libeigen3-dev libboost-all-dev doxygen libopencv-dev
sudo apt-get install libopencv-dev ros-melodic-vision-opencv ros-melodic-image-transport-plugins ros-melodic-cmake-modules software-properties-common libpoco-dev python-matplotlib python-scipy python-git python-pip libtbb-dev libblas-dev liblapack-dev python-catkin-tools libv4l-dev
ubuntu 20版本可能需要把所有python改成python3
sudo apt-get install python3-setuptools python3-rosinstall ipython3 libeigen3-dev libboost-all-dev doxygen libopencv-dev sudo apt-get install libopencv-dev ros-noetic-vision-opencv ros-noetic-image-transport-plugins ros-noetic-cmake-modules software-properties-common libpoco-dev python3-matplotlib python3-scipy python3-git python3-pip libtbb-dev libblas-dev liblapack-dev python3-catkin-tools libv4l-dev
pip install wxPython
确保numy版本在1.21之下，若高于该版本会出现no attribute 'typeDict'，可如下直接换版本
pip install numpy==1.21
安装kalibr
mkdir -p kalibr_ws/src
cd kalibr_ws/src
git clone https://github.com/ethz-asl/Kalibr.git
cd ..
catkin build -DCMAKE_BUILD_TYPE=Release -j4
3.2 开始标定
下载kalibr提供的网格和它的参数文件
官方数据：
先修改imu的发布频率,官方推荐为200Hz
rosrun topic_tools throttle messages /imu/data 200.0 /imu/data_raw
throttle的工具实测不好用，并不能精确达到想要的频率，特别是这种高频的数据，我运行该代码只能得到70多Hz的频率……
可能我的IMU频率本身也就200多？
1、 把IMU和相机固定在一起，录制ROS bag包
rosbag record /imu/data /camera/left/image_raw /camera/right/image_raw -o images_imu.bag
注：
1、录制的时候要注意按照官方的说法-充分激励IMU- 绕3个轴旋转和3个方向的平移，这里有个官方视频介绍，打不开的话有人把它搬到B站上了
2、三个topic按照自己的情况改。另外可以再加两个(非必要)：/camera/left/camera_info /camera/right/camera_info
2、 启动校准包开始校准
在运行上也有点问题：
可能是我系统里有anaconda导致的，解决方法是打开kalibr/aslam_offline_calibration/kalibr/python/kalibr_calibrate_imu_camera，第一行改成 #!/usr/bin/env python2（ros-melodic）
改好后运行下面代码开始标定
cd ~/kalibr_ws
source ./devel/setup.bash
rosrun kalibr kalibr_calibrate_imu_camera --target april_6x6_55x55mm.yaml --bag images_imu.bag --cam cam_chain.yaml --imu imu.yaml --imu-models calibrated --timeoffset-padding 0.1 --bag-from-to 5 50
参数：
1）–target april_6x6_55x55mm.yaml： 描述标定板的信息
2）–bag images_imu.bag： 指定数据包
3）–bag-from-to 5 50： 设定bag包开始时间和结束时间，避开拿起和放下IMU的时间段内的数据（太人性化了！）
4）–cam cam_chain.yaml： 相机参数文件
5）–imu xsens_imu.yaml： 设定IMU标定信息
6）–imu-models scale-misalignment： IMU的参数模型
如果你报了优化失败的错，一定加上–timeoffset-padding，默认为0.03，我改到了0.1，也有改0.3的，视情况而定。值越大越慢，但至少没那么容易失败了。
1、另外可以加上–show extraction参数，以可视化校准目标提取过程。这可能有助于发现目标配置和提取的问题。
2、最少要有 –target，–cam，–imu，–bag四个参数
april_6x6_55x55mm.yaml文件内容：
target_type: 'aprilgrid' #gridtype
tagCols: 6 #number of apriltags
tagRows: 6 #number of apriltags
tagSize: 0.088 #size of apriltag, edge to edge [m]
tagSpacing: 0.3 #ratio of space between tags to tagSize
codeOffset: 0 #code offset for the first tag in the aprilboard
也可以用棋盘格！！！
// 棋盘格的设置与代码内参数设置一样即可
#example for checkerboard
target_type: 'checkerboard' #gridtype
targetRows: 12 #number of internal chessboard corners
targetCols: 8 #number of internal chessboard corners
rowSpacingMeters: 0.044 #size of one chessboard square [m]
colSpacingMeters: 0.044 #size of one chessboard square [m]
不过经过个人实践，实际上并不能跑通，会报错说提取不到特征点：
[FATAL] [1652801101.139525]: No corners could be extracted for camera /camera/left/image_raw! Check the calibration target configuration and dataset.
我没有去专研过源码，若有大佬经过还请为笔者解惑！！！
camchain.yaml 文件内容(注意内参和畸变参数的格式，相关参数格式可参考; 另外也可以没有cam1):
cam0:
camera_model: pinhole
intrinsics: [738.2309, 738.0446, 612.8741, 383.5233]
distortion_model: radtan
distortion_coeffs: [0.125858705085614,-0.164938923226198,-0.000829975384038096,0.000840974135014823]
resolution: [1280, 720]
rostopic: /camera/left/image_raw
cam1:
T_cn_cnm1:
- [ 9.997966e-01, 6.104940e-04, -2.015940e-02,6.024595e-02]
- [-5.637016e-04, 9.999971e-01, 2.326720e-03,-3.476903e-04]
- [2.016076e-02, -2.314883e-03, 9.997941e-01,2.469048e-02]
- [0.0, 0.0, 0.0, 1.0]
camera_model: pinhole
intrinsics: [737.7944,737.3724,634.835802105515,383.846288864773]
distortion_model: radtan
distortion_coeffs: [0.125858705085614,-0.164938923226198,-0.000564115553046124,0.000999594481541572]
resolution: [1280, 720]
rostopic: /camera/right/image_raw
注意两相机变换矩阵的单位为m，不再是相机标定时的mm！不改的话相机2的重投影误差会非常大！
如果你的两个相机是严格同步的，并且已经标定过两相机外参，则不必再有cam1，即：
cam0:
camera_model: pinhole
intrinsics: [738.2309, 738.0446, 612.8741, 383.5233]
distortion_model: radtan
distortion_coeffs: [0.125858705085614,-0.164938923226198,-0.000829975384038096,0.000840974135014823]
resolution: [1280, 720]
rostopic: /camera/left/image_raw
不要耍小聪明用立体校正后的相机内参，然后令畸变参数都为0。因为你可能会发现用到代码里会很麻烦。
imu.yaml 文件内容:
#Accelerometers
accelerometer_noise_density: 1.030e-3 #Noise density (continuous-time)
accelerometer_random_walk: 1.196e-3 #Bias random walk
#Gyroscopes
gyroscope_noise_density: 2.01e-4 #Noise density (continuous-time)
gyroscope_random_walk: 1.3e-5 #Bias random walk
rostopic: /IMU_data #the IMU ROS topic
update_rate: 200.0 #Hz (for discretization of the values above)
标定结果保存为 xxx-camchain-imucam.yaml，xxx-report-imu.yaml，xxx-report-imucam.pdf，xxx-results-imucam.txt 四个文件
其中.txt文件中的部分结果,最重要的是相机与imu的变换矩阵（相机到IMU（T_ci），IMU到相机都有（T_ic））
Calibration results
===================
Normalized Residuals
----------------------------
Reprojection error (cam0): mean 1.56945550752, median 1.44059444585, std: 0.829635923744
Gyroscope error (imu0): mean 21.1625990425, median 15.0336046344, std: 21.0766788496
Accelerometer error (imu0): mean 14.4663714006, median 11.6741933589, std: 11.0344310746
Residuals
----------------------------
Reprojection error (cam0) [px]: mean 1.56945550752, median 1.44059444585, std: 0.829635923744
Gyroscope error (imu0) [rad/s]: mean 0.0601561535077, median 0.0427340624062, std: 0.0599119194086
Accelerometer error (imu0) [m/s^2]: mean 0.220747631851, median 0.178140769815, std: 0.16837840403
Transformation (cam0):
-----------------------
T_ci: (imu0 to cam0):
[[-0.00335273 0.99990285 -0.01352977 0.00020972]
[-0.99918854 -0.00389278 -0.04008876 -0.00025106]
[-0.04013753 0.01338438 0.99910452 -0.00009292]
[ 0. 0. 0. 1. ]]
T_ic: (cam0 to imu0):
[[-0.00335273 -0.99918854 -0.04013753 -0.00025389]
[ 0.99990285 -0.00389278 0.01338438 -0.00020944]
[-0.01352977 -0.04008876 0.99910452 0.00008561]
[ 0. 0. 0. 1. ]]
timeshift cam0 to imu0: [s] (t_imu = t_cam + shift)
-0.148418387849
Gravity vector in target coords: [m/s^2]
[ 0.24594665 -9.75661592 -0.95727683]
Calibration configuration
=========================
cam0
-----
Camera model: pinhole
Focal length: [719.4553, 718.4151]
Principal point: [609.0952, 379.0658]
Distortion model: radtan
Distortion coefficients: [0.1293687, -0.1560079, -0.00257736, -0.0007919026]
Type: aprilgrid
Tags:
Rows: 6
Cols: 6
Size: 0.032 [m]
Spacing 0.009 [m]
IMU configuration
=================
IMU0:
----------------------------
Model: calibrated
Update rate: 200.0
Accelerometer:
Noise density: 0.001079
Noise density (discrete): 0.015259364338
Random walk: 0.000231
Gyroscope:
Noise density: 0.000201
Noise density (discrete): 0.00284256926037
Random walk: 1.3e-05
T_i_b
[[ 1. 0. 0. 0.]
[ 0. 1. 0. 0.]
[ 0. 0. 1. 0.]
[ 0. 0. 0. 1.]]
time offset with respect to IMU0: 0.0 [s]
参考
ros数据集录制：rosbag record
ROS读IMU数据
相机与IMU联合标定
camera-imu标定 联合标定
扫一扫
7136
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
